{"title":"Engineer","description":"\u003cp\u003eThe development of tools transformed life and enhanced our way of living from ancient times. From each of life’s platforms, new tools are born, altered from time to time and may sometimes heighten personal spirit. The craftsman, depending upon his craft, can keep alive in the professionalism with specific tools.\u003c\/p\u003e\n\u003cp\u003eSince 1948 ENGINEER has contributed to this transformation specializing in tools for the electronics industry. Specific tools with various uses including Screw Removers (the Nejisaurus), Scissors, Nippers, Pliers, Crimping \u0026amp; Stripping tools, Tweezers, Drivers and Wrenches. Tools produced with \"Spirit” with the purpose to act as a bridge between generations and regard them as a cultural heritage.\u003c\/p\u003e","products":[{"product_id":"engineer-fret-saw-spare-blades-tn-13-fine-pitch-teeth","title":"Engineer Fret Saw Spare Blades TN-13 (Fine Pitch Teeth)","description":"\u003cp\u003eThis page introduces the spare blades of ENGINEER Inc.'s TN-04 fret saw. Eight varieties of spare blades are available, and TN-13 has the third finest pitch (number of teeth per inch).\u003c\/p\u003e\n\u003cp\u003eBlades made of the SKS alloy with full heat treatment ensure great sharpness and hardness. Featuring the non-set teeth which enable smooth and beautiful cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SKS steel alloy\u003c\/li\u003e\n\u003cli\u003eContent: 12 blades\u003c\/li\u003e\n\u003cli\u003eBlade length: 130mm\u003c\/li\u003e\n\u003cli\u003eBlade width: 0.9mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.28mm\u003c\/li\u003e\n\u003cli\u003eNotches (per 25mm): 53.5\u003c\/li\u003e\n\u003cli\u003eWeight (per blade): 5g\u003c\/li\u003e\n\u003cli\u003eNOTE: Blade is designed to cut thin and relatively soft objects like aluminum plates, substrates, and plastic materials. Do not use this product on the thick and\/or hard materials.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50707992445218,"sku":"ENGI-FRTSWB-TN13","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FRTSWB-TN13-Engineer_Fret_Saw_Spare_Blades_TN-13_Fine_Pitch_Teeth_-2023-09-26T15_19_09.jpg?v=1766120911"},{"product_id":"engineer-side-cutting-pliers-165mm-pd-06","title":"Engineer Side Cutting Pliers 165mm PD-06","description":"\u003cp\u003eThe Engineer Side Cutting Pliers PD-06 are a high-quality Japanese electrician's pliers of a durable body and a soft-touch grip specially designed for professional-use.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSoft-touch grip\u003c\/li\u003e\n\u003cli\u003eCutting capacity: Iron wire φ2.6mm, Copper wire (single wire) φ3.2mm, Copper wire (stranded wire) φ8mm², VVF φ1.6mm × 3 cores\u003c\/li\u003e\n\u003cli\u003eSize: 165mm\u003c\/li\u003e\n\u003cli\u003eWeight: 205g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708004077858,"sku":"ENGI-SIDPLR-PD06","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-SIDPLR-PD06-Engineer_Side_Cutting_Pliers_165mm_PD-06-2023-09-26T15_19_08.jpg?v=1766121320"},{"product_id":"engineer-spring-hook-ss-21","title":"Engineer Spring Hook SS-21","description":"\u003cp\u003eSS-21 is a tool for works using spring. It is ideally designed for installment\/removal as well as adjustment of spring.\u003c\/p\u003e\n\u003cp\u003eApplicable to coiled and tension springs used in electronic device and precise instruments.\u003c\/p\u003e\n\u003cp\u003eUsers can remove leads, resistor, and interconnection in a confined area on the PCB. Also useful for array inspection.\u003c\/p\u003e\n\u003cp\u003eU-shaped head on another side of grip end, for resistor leads\/capacitator alignment.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): Stainless Steel\u003c\/li\u003e\n\u003cli\u003eU-shaped head and S-shaped hook on each side of the end.\u003c\/li\u003e\n\u003cli\u003eOverall length: 215mm\u003c\/li\u003e\n\u003cli\u003eWeight: 15g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708006797602,"sku":"ENGI-SPRHOK-SS21","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-SPRHOK-SS21-Engineer_Spring_Hook_SS-21-2023-09-26T15_19_07.jpg?v=1766121335"},{"product_id":"engineer-anti-static-gloves-palm-coat-zc-56","title":"Engineer Anti-static Gloves (Palm Coat) ZC-56","description":"\u003cp\u003eElectrostatic discharge (ESD) gloves with non-slip coating ideal for sensitive electronic works. For works handling light electrical devices, display monitor, electric bulb, compact disc, glass, semiconductor, and other precision instruments.\u003c\/p\u003e\n\u003cp\u003eThe gloves' ESD resistance coating on palms protects your hands from electrostatic charges.\u003c\/p\u003e\n\u003cp\u003eMade of seamless, elastic, and breathable nylon fiber, giving flexible and comfortable use.\u003c\/p\u003e\n\u003cp\u003eGloves are washable with ordinary detergent.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Nylon 75% \u0026amp; Acryl 25% (fabric) \/ polyurethane resin (coating)\u003c\/li\u003e\n\u003cli\u003eCoating part: Palm\u003c\/li\u003e\n\u003cli\u003eSurface resistivity: 1×10⁶～10⁸Ω\u003c\/li\u003e\n\u003cli\u003ePalm circumference: 185~195mm\u003c\/li\u003e\n\u003cli\u003eLength (middle finger): 75~80mm\u003c\/li\u003e\n\u003cli\u003eWeight: 21g\u003c\/li\u003e\n\u003cli\u003eNOTE: To prevent conductivity deterioration, refrain from washing with detergents including chlorine-based oxidizer.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708011385122,"sku":"ENGI-ASTGLV-ZC56","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ASTGLV-ZC56-Engineer_Anti-static_Gloves_Palm_Coat_ZC-56-2023-09-26T15_19_09.jpg?v=1766121379"},{"product_id":"engineer-screw-removal-tool-kit-pds-01","title":"Engineer Screw Removal Tool Kit PDS-01","description":"\u003cp\u003eENGINEER Inc.'s PDS-01 includes a set of frequently-used screw removing items. It is the best solutions for any works\/troubles related to screw removal. The contents are a screw plier, a screw extractor, 5 interchangeable bits, and a bit holder.\u003c\/p\u003e\n\u003cp\u003eExclusive storage case contained. Compact, durable, and cushion inside keeping contents undamaged.\u003c\/p\u003e\n\u003ch3\u003ePliers\u003c\/h3\u003e\n\u003cp\u003eJaws have both horizontal and vertical serrations facilitating firm screw gripping with little slip.\u003c\/p\u003e\n\u003cp\u003eWire cutter at the inner jaws, cutting capacity within φ1.2mm for copper wire and φ1.0mm for steel wire.\u003c\/p\u003e\n\u003cp\u003eSpring on the body, and ergonomically designed handles, facilitating heavy work with smaller fatigue.\u003c\/p\u003e\n\u003cp\u003eApplicable to screw head between φ3 and 9mm. Can remove stripped, rusted, Torx (six-robed), and dome heads.\u003c\/p\u003e\n\u003cp\u003eCan use for removing stuck jar lid as well as beer bottle lid, and punching empty gas cylinder.\u003c\/p\u003e\n\u003ch3\u003eScrew Extractor\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eHigh-torque handle grip materializing quick and fatigue-free insertion\/extraction. Can remove damaged countersunk screws.\u003c\/p\u003e\n\u003ch3\u003eBits\u003c\/h3\u003e\n\u003cp\u003eDBZ-51 is a press \u0026amp; twist type bit is useful when removing slightly damaged phillips screw. Hammering unnecessary.\u003c\/p\u003e\n\u003cp\u003eDBZ-52 is a strike \u0026amp; turn type bit is useful when removing seriously damaged phillips screw. Hammering necessary.\u003c\/p\u003e\n\u003cp\u003eDBZ-53, 54, and 56 are strike \u0026amp; turn type bits designed for seriously damaged hex screw removal; suitable for drive size 2.5~3mm, 4mm, and 5mm, respectively. Hammering necessary.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents: screw removal pliers (with jaws cap), handle grip for bits, press \u0026amp; twist type bit, strike \u0026amp; turn type bit, 3 hex screws, and carrying case\u003c\/li\u003e\n\u003cli\u003eMaterial: carbon steel (pliers body \u0026amp; grip) \/ thermoplastic elastomer  (pliers grip \u0026amp; rubber on hex bits) \/ ABS, Nylon (handle grip) \/ high carbon steel (bits) \/ high density polyethylene (case)\u003c\/li\u003e\n\u003cli\u003eSize (pliers): L160×W54×H15mm\u003c\/li\u003e\n\u003cli\u003eSize (handle grip): L107×W60×H32mm\u003c\/li\u003e\n\u003cli\u003eSize (case): L190×W300×H60mm\u003c\/li\u003e\n\u003cli\u003eNote (pliers): Pliers cannot remove specially-hardened, heat-treated or glued screws. Do not apply to screw thread. Avoid using to current-carrying objects.\u003c\/li\u003e\n\u003cli\u003eNote (handle grip): Do not hammer the handle grip. Avoid using in hot-temperature atmosphere.\u003c\/li\u003e\n\u003cli\u003eNote (bits): Inapplicable to coarse thread, tapping screw, and drilling screw. Bits are uninsulated; do not use to current-carrying objects.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708011581730,"sku":"ENGI-RMVKIT-PDS01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-RMVKIT-PDS01-Engineer_Screw_Removal_Tool_Kit_PDS-01-2023-09-26T15_41_42.jpg?v=1766121390"},{"product_id":"engineer-jet-black-file-set-tfs-20-for-precision-cut","title":"Engineer Jet Black File Set TFS-20 (For Precision Cut)","description":"\u003cp\u003eENGINEER Inc. produces 3 file sets: each contains 5 different files with a brush for debris cleaning and an exclusive storage case.\u003c\/p\u003e\n\u003cp\u003eTFS-20 is a 6-in-1 set consisting of 5 precision cut files and a brush.\u003c\/p\u003e\n\u003cp\u003eJet black coating on files, giving rust resistance and long-lasting sharpness. The coating also prevent file teeth from burr clogging, thus easy to clean even after heavy use.\u003c\/p\u003e\n\u003cp\u003eSuitable for works include deburring, grinding, plastic model gate polishing, burnishing aluminum, copper, precious metals, resin, iron, and stainless steel.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (files): High carbon steel (with jet black coating)\u003c\/li\u003e\n\u003cli\u003eContents: Flat file, half-round file, round file, square file, triangle file, cleaning brush, and roll-up storage case\u003c\/li\u003e\n\u003cli\u003eFile overall length: 200mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 100mm\u003c\/li\u003e\n\u003cli\u003eTotal weight: 170g\u003c\/li\u003e\n\u003cli\u003eNOTE: Do not use the files on the edged tools or the metal molds. Do not use this product beyond its intended purpose and capacity.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708012564770,"sku":"ENGI-FILEST-TFS20","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FILEST-TFS20-Engineer_Jet_Black_File_Set_TFS-20_For_Precision_Cut_-2023-09-26T15_19_09.jpg?v=1766121408"},{"product_id":"engineer-smart-monkey-wrench-twm-07","title":"Engineer Smart Monkey Wrench TWM-07","description":"\u003cp\u003eThis is a convenient monkey wrench because it can fasten\/loosen thin nuts and double nuts with ease.\u003c\/p\u003e\n\u003cp\u003eJaws only has 2mm thick, enables works in confined place or into the gap. Jaws can open up to 24mm.\u003c\/p\u003e\n\u003cp\u003eStylish frame design with manufacturer logo engraved on grip.\u003c\/p\u003e\n\u003cp\u003eOther possible applications are caster fastening, coaxial connector adjustment, car\/bicycle maintenance, etc.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chrome molybdenum steel\u003c\/li\u003e\n\u003cli\u003eOverall length: 164mm\u003c\/li\u003e\n\u003cli\u003eJaws maximum opening: 24mm\u003c\/li\u003e\n\u003cli\u003eJaws length: 16mm\u003c\/li\u003e\n\u003cli\u003eJaws thickness: 2mm\u003c\/li\u003e\n\u003cli\u003eWeight: 130g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708012695842,"sku":"ENGI-WRENCH-TWM07","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-WRENCH-TWM07-Engineer_Smart_Monkey_Wrench_TWM-07-2023-09-26T15_19_08.jpg?v=1766121415"},{"product_id":"engineer-snap-ring-pliers-pz-19","title":"Engineer Snap Ring Pliers PZ-19","description":"\u003cp\u003eENGINEER Inc offers 4 different snap ring pliers (PZ-16 \/ PZ-17 \/ PZ-18 \/ PZ-19). Choose the best suited pliers based on applicable ring size and ring type.\u003c\/p\u003e\n\u003cp\u003ePZ-19 is for internal axial rings, applicable to ring size between #19~60mm.\u003c\/p\u003e\n\u003cp\u003eSlender jaws makes the work at the tight area easier.\u003c\/p\u003e\n\u003cp\u003eThe joint has built-in spring facilitating smoother grip open\/close with less fatigue even during repeated work.\u003c\/p\u003e\n\u003cp\u003eSpiked tips angled inward. Enable to close the ring and hold it tightly with little slipping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (blades): High carbon steel\u003c\/li\u003e\n\u003cli\u003eApplicable ring size: #19-60mm\u003c\/li\u003e\n\u003cli\u003eJaw tips diameter: φ1.8mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 165mm\u003c\/li\u003e\n\u003cli\u003eGrip width: 130mm\u003c\/li\u003e\n\u003cli\u003eWeight: 175g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708012794146,"sku":"ENGI-RNGPLR-PZ19","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-RNGPLR-PZ19-Engineer_Snap_Ring_Pliers_PZ-19-2023-09-26T15_41_43.jpg?v=1766121422"},{"product_id":"engineer-electronic-snips-curved-point-ph-34","title":"Engineer Electronic Snips (Curved Point) PH-34","description":"\u003cp\u003eEngineer's Electronic Snips is the best solution for delicate cutting such as work related to printed circuit board. PH-34 is a curved-point model.\u003cbr\u003e\n\u003cbr\u003eSaw-toothed cutting edge useful to cut objects with little slipping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCurve-pointed\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSize (overall length): 145mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 28mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 1.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 33g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708013121826,"sku":"ENGI-ELESNP-PH34","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ELESNP-PH34-Engineer_Electronic_Snips_Curved_Point_PH-34-2023-09-26T15_19_06.jpg?v=1766121429"},{"product_id":"engineer-insulated-terminal-set-pa-92","title":"Engineer Insulated Terminal Set PA-92","description":"\u003cp\u003ePA-92 is a set of frequently-used insulated crimp terminals and connectors contained in a plastic case.\u003c\/p\u003e\n\u003cp\u003eRV-type and YV-type terminals contained with both having 3 different sizes.\u003c\/p\u003e\n\u003cp\u003eFor crimping purpose.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents (sectional area \/ screw dia.×number): Insulated terminal RV (1.25mm²\/3mm×10 pcs, 1.25mm²\/4mm×10pcs, 2mm²\/5mm×10pcs), insulated terminal YV(1.25mm²\/3mm×10pcs, 1.25mm²\/4mm×10pcs, 2mm²\/5mm×10pcs)\u003c\/li\u003e\n\u003cli\u003eMaterial: Copper, tin plated\u003c\/li\u003e\n\u003cli\u003eWeight: 70g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708013744418,"sku":"ENGI-TERMST-PA92","price":15.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-TERMST-PA92-Engineer_Insulated_Terminal_Set_PA-92-2023-09-26T15_19_08.jpg?v=1766121447"},{"product_id":"engineer-jet-black-file-set-tfs-30-for-smooth-cut","title":"Engineer Jet Black File Set TFS-30 (For Smooth Cut)","description":"\u003cp\u003eENGINEER Inc. produces 3 file sets: each contains 5 different files with a brush for debris cleaning and an exclusive storage case.\u003c\/p\u003e\n\u003cp\u003eTFS-30 is a 6-in-1 set consisting of 5 smooth cut files and a brush.\u003c\/p\u003e\n\u003cp\u003eJet black coating on files, giving rust resistance and long-lasting sharpness. The coating also prevent file teeth from burr clogging, thus easy to clean even after heavy use.\u003c\/p\u003e\n\u003cp\u003eSuitable for works include deburring, grinding, plastic model gate polishing, burnishing aluminum, copper, precious metals, resin, iron, and stainless steel.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (files): High carbon steel (with jet black coating)\u003c\/li\u003e\n\u003cli\u003eContents: Flat file, half-round file, round file, square file, triangle file, cleaning brush, and roll-up storage case\u003c\/li\u003e\n\u003cli\u003eFile overall length: 215mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 100mm\u003c\/li\u003e\n\u003cli\u003eTotal weight: 371g\u003c\/li\u003e\n\u003cli\u003eNOTE: Do not use the files on the edged tools or the metal molds. Do not use this product beyond its intended purpose and capacity.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708014498082,"sku":"ENGI-FILEST-TFS30","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FILEST-TFS30-Engineer_Jet_Black_File_Set_TFS-30_For_Smooth_Cut_-2023-09-26T15_19_09.jpg?v=1766121462"},{"product_id":"engineer-rust-remover-zc-28","title":"Engineer Rust Remover ZC-28","description":"\u003cp\u003eRust disappearing like a magic! A liquid-type rust remover which eliminates the rust on screw quickly and powerfully.\u003c\/p\u003e\n\u003cp\u003eNeutral liquid: no acid nor alkali. Less harmful to bare skin.\u003c\/p\u003e\n\u003cp\u003eThe liquid penetrates through small gaps and reaches. Although depending on the screw size, wait for 20~30 seconds and the screw is ready for removal.\u003c\/p\u003e\n\u003ch3\u003eInstructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply a few drips of liquid to the rusted screw. Add more drips for very rusty screw.\u003c\/li\u003e\n\u003cli\u003eOnce the liquid is sufficiently penetrated, use the screw remover to take off the object.\u003c\/li\u003e\n\u003cli\u003eRinse the screw in water after rust removal. After this, apply an anti-rust agent without fail.\u003c\/li\u003e\n\u003cli\u003eFor a better rust removal performance, heat the liquid. However, avoid overheating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlthough the liquid is designed relatively harmless, wear protective gears (eyeglasses, gloves, etc.) to secure safety.\u003c\/li\u003e\n\u003cli\u003eWash thoroughly in case of skin contact.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly in case of eye contact.\u003c\/li\u003e\n\u003cli\u003eDrink plenty of water in case of accidental swallow.\u003c\/li\u003e\n\u003cli\u003eMove to a place of fresh air immediately in case of accidental inhalation.\u003c\/li\u003e\n\u003cli\u003eThis product has a peculiar smell.\u003c\/li\u003e\n\u003cli\u003eDo not mix with other chemicals.\u003c\/li\u003e\n\u003cli\u003eAccording to ENGINEER Inc., the product package design is sequentially changing, but there are no changes in quality of product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIngredient: Thioglycolic acid ammonium\u003c\/li\u003e\n\u003cli\u003eLiquid color: clear and colorless (the liquid turns purple during rust removal)\u003c\/li\u003e\n\u003cli\u003eApplicable screw type: red, brown, and yellow colored rust on iron, copper, stainless steel, brass, etc.\u003c\/li\u003e\n\u003cli\u003eInapplicable screw type: white-colored rust (aluminum etc.), black-colored rust (iron oxide), or green-colored heavy rust (verdigris)\u003c\/li\u003e\n\u003cli\u003eBottle size: φ40×H140mm\u003c\/li\u003e\n\u003cli\u003eContents: 100ml\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708016759074,"sku":"ENGI-RSTRMV-ZC28","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-RSTRMV-ZC28-Engineer_Rust_Remover_ZC-28-2023-09-26T15_19_08.jpg?v=1766121480"},{"product_id":"engineer-anti-static-gloves-finger-coat-zc-53","title":"Engineer Anti-static Gloves (Finger Coat) ZC-53","description":"\u003cp\u003eElectrostatic discharge (ESD) gloves with non-slip coating ideal for sensitive electronic works. For works handling light electrical devices, display monitor, electric bulb, compact disc, glass, semiconductor, and other precision instruments.\u003c\/p\u003e\n\u003cp\u003eThe gloves' ESD resistance coating on fingertips protects your hands from electrostatic charges.\u003c\/p\u003e\n\u003cp\u003eMade of seamless, elastic, and breathable nylon fiber, giving flexible and comfortable use.\u003c\/p\u003e\n\u003cp\u003eGloves are washable with ordinary detergent.\u003cbr\u003e\n\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Nylon 75% \u0026amp; Acryl 25% (fabric) \/ polyurethane resin (coating)\u003c\/li\u003e\n\u003cli\u003eCoating part: Fingertips\u003c\/li\u003e\n\u003cli\u003eSurface resistivity: 1×10⁶～10⁸Ω\u003c\/li\u003e\n\u003cli\u003ePalm circumference: 185~195mm\u003c\/li\u003e\n\u003cli\u003eLength (middle finger): 75~80mm\u003c\/li\u003e\n\u003cli\u003eWeight: 18g\u003c\/li\u003e\n\u003cli\u003eNOTE: To prevent conductivity deterioration, refrain from washing with detergents including chlorine-based oxidizer.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708020658466,"sku":"ENGI-ASTGLV-ZC53","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ASTGLV-ZC53-Engineer_Anti-static_Gloves_Finger_Coat_ZC-53-2023-09-26T15_19_09.jpg?v=1766121511"},{"product_id":"engineer-neji-saurus-vp-series-screw-removal-locking-pliers-pz-64","title":"Engineer Neji Saurus VP Series Screw Removal Locking Pliers PZ-64","description":"\u003cp\u003eENGINEER Inc.'s PZ-64 is a vice grip type, curved-jaw locking pliers. It is a multi-function pliers mainly designed for screw removal, object tightening, and wire cutting.\u003c\/p\u003e\n\u003cp\u003eJust like the other Neji Saurus variants, this product can remove stripped, rusted, torx(six-lobed), and dome headed screws. This is due to the jaws' horizontal and vertical serrations which ensures easy bite, tighter hold, and slipping-proof (patented feature).\u003c\/p\u003e\n\u003cp\u003eSimple to use: hold the screw head, lock the pliers tightly, and twist the screw. When releasing, just pull the handles with both hands.\u003c\/p\u003e\n\u003cp\u003eHex key adjusting bolt to adjust pressure and hold the objects closer. You can retighten the adjusting bolt by using hex key wrench (4mm).\u003c\/p\u003e\n\u003cp\u003eThe adjustable jaws expand your workability. For instance, you can firmly tighten the plate materials by closing it while can hold round objects (up to φ38mm) by widening the jaws opening.\u003c\/p\u003e\n\u003cp\u003eCutter on the inner side of the jaws, able to cut copper wires.\u003c\/p\u003e\n\u003cp\u003eFeaturing an easy-to-hold, hard-to-slip elastomer handles.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): Chromium molybdenum steel (body) \/ TPR Elastomer (handles)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with φ3~9.5mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 150×55×18mm\u003c\/li\u003e\n\u003cli\u003eMaximum jaw opening: φ28mm\u003c\/li\u003e\n\u003cli\u003eWeight: 205g\u003c\/li\u003e\n\u003cli\u003eCutting capacity: φ1.6mm copper wire\u003c\/li\u003e\n\u003cli\u003eNOTE: Cannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust. Make sure to apply this tool to a screw head, not to screw thread. Do not use this product beyond its intended capacity \u0026amp; purpose.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708020986146,"sku":"ENGI-NVPPLR-PZ64","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-NVPPLR-PZ64-Engineer_Neji_Saurus_VP_Series_Screw_Removal_Locking_Pliers_PZ-64-2023-09-26T15_19_09.jpg?v=1766121513"},{"product_id":"engineer-neji-saurus-vp-series-screw-removal-locking-pliers-pz-65","title":"Engineer Neji Saurus VP Series Screw Removal Locking Pliers PZ-65","description":"\u003cp\u003eENGINEER Inc.'s PZ-65 is a vice grip type, curved-jaw locking pliers. It is a multi-function pliers mainly designed for screw removal, object tightening, and wire cutting.\u003c\/p\u003e\n\u003cp\u003eJust like the other Neji Saurus variants, this product can remove stripped, rusted, torx(six-lobed), and dome headed screws. This is due to the jaws' horizontal and vertical serrations which ensures easy bite, tighter hold, and slipping-proof (patented feature).\u003c\/p\u003e\n\u003cp\u003eSimple to use: hold the screw head, lock the pliers tightly, and twist the screw. When releasing, just pull the handles with both hands.\u003c\/p\u003e\n\u003cp\u003eHex key adjusting bolt to adjust pressure and hold the objects closer. You can retighten the adjusting bolt by using hex key wrench (4mm).\u003c\/p\u003e\n\u003cp\u003eThe adjustable jaws expand your workability. For instance, you can firmly tighten the plate materials by closing it while can hold round objects (up to φ48mm) by widening the jaws opening.\u003c\/p\u003e\n\u003cp\u003eCutter on the inner side of the jaws, able to cut copper wires.\u003c\/p\u003e\n\u003cp\u003eFeaturing an easy-to-hold, hard-to-slip elastomer handles.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): Chromium molybdenum steel (body) \/ TPR Elastomer (handles)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with φ7~12mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 190×70×23mm\u003c\/li\u003e\n\u003cli\u003eMaximum jaw opening: φ40mm\u003c\/li\u003e\n\u003cli\u003eWeight: 400g\u003c\/li\u003e\n\u003cli\u003eCutting capacity: φ2.3mm copper wire\u003c\/li\u003e\n\u003cli\u003eNOTE: Cannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust. Make sure to apply this tool to a screw head, not to screw thread. Do not use this product beyond its intended capacity \u0026amp; purpose.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708021215522,"sku":"ENGI-NVPPLR-PZ65","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-NVPPLR-PZ65-Engineer_Neji_Saurus_VP_Series_Screw_Removal_Locking_Pliers_PZ-65-2023-09-26T15_19_09.jpg?v=1766121519"},{"product_id":"engineer-fret-saw-spare-blades-tn-11-finest-pitch-teeth","title":"Engineer Fret Saw Spare Blades TN-11 (Finest Pitch Teeth)","description":"\u003cp\u003eThis page introduces the spare blades of ENGINEER Inc.'s TN-04 fret saw. Eight varieties of spare blades are available, and TN-11 has the finest pitch (number of teeth per inch).\u003c\/p\u003e\n\u003cp\u003eBlades made of the SKS alloy with full heat treatment ensure great sharpness and hardness. Featuring the non-set teeth which enable smooth and beautiful cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SKS steel alloy\u003c\/li\u003e\n\u003cli\u003eContent: 12 blades\u003c\/li\u003e\n\u003cli\u003eBlade length: 130mm\u003c\/li\u003e\n\u003cli\u003eBlade width: 0.9mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.24mm\u003c\/li\u003e\n\u003cli\u003eNotches (per 25mm): 61\u003c\/li\u003e\n\u003cli\u003eWeight (per blade): 5g\u003c\/li\u003e\n\u003cli\u003eNOTE: Blade is designed to cut thin and relatively soft objects like aluminum plates, substrates, and plastic materials. Do not use this product on the thick and\/or hard materials.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708021281058,"sku":"ENGI-FRTSWB-TN11","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FRTSWB-TN11-Engineer_Fret_Saw_Spare_Blades_TN-11_Finest_Pitch_Teeth_-2023-09-26T15_19_09.jpg?v=1766121523"},{"product_id":"engineer-socket-head-screw-remover-set-for-stripped-screws-dxz-40","title":"Engineer Socket Head Screw Remover Set For Stripped Screws DXZ-40","description":"\u003cp\u003eThe Engineer Socket Head Screw Remover Set DXZ-40 is designed to extract stripped or damaged socket head screws with ease. This specialized set includes multiple sizes to fit various screw heads, allowing you to remove screws that standard drivers cannot grip. Each remover is precision-machined from hardened steel to provide strong durability and reliable performance.\u003c\/p\u003e\n\u003cp\u003eThis complete repair kit comes with 4 standard hex bits for removing hex-head screws and bolts, 4 screw remover bits to dig into stripped hex head fasteners and pull them out, a flexible extension to reach fasteners in tight places, and a multifunctional driver grip.\u003c\/p\u003e\n\u003cp\u003eThis tool set reflects dedication to precision engineering and quality craftsmanship. It is especially useful in repair work where stripped screws pose a challenge, helping to avoid damage to surrounding materials and save time.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes multiple remover sizes to fit different socket head screws\u003c\/li\u003e\n\u003cli\u003eMade from hardened steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eDesigned to grip and remove stripped screws securely\u003c\/li\u003e\n\u003cli\u003eCompact set ideal for workshop or on-site repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents: 4x socket head screw removers, 4x socket head screw bits, flexible extender, grip and pouch.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708021313826,"sku":"ENGI-DRLBIT-TDS03","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/Engineer-Socket-Head-Screw-Remover-Set-For-Stripped-Screws-DXZ-40-1-2025-05-16T08_16_49.586Z.jpg?v=1766121526"},{"product_id":"engineer-japanese-scissors-tetsuwan-ph-57","title":"Engineer Japanese Scissors Tetsuwan PH-57","description":"\u003cp\u003eThe Engineer Tetsuwan Japanese scissors are optimal for cutting cables, ropes, codes, fibers, and similar materials.\u003c\/p\u003e\n\u003cp\u003e2-tone handles made of cushioned rubber (TPR) + shock-proof ABS, ideal for heavy-duty and fatigue-free work.\u003c\/p\u003e\n\u003cp\u003e2-in-1 anti-slip serrations and U-shaped blade Ideal for power supply cord, coaxiale cable, rope, etc.\u003c\/p\u003e\n\u003cp\u003eThe overlapping guard prevents your fingers from being pinched.\u003c\/p\u003e\n\u003cp\u003eDesigned to have both excellent performance and durability.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull length: 210mm\u003c\/li\u003e\n\u003cli\u003eFull width: 98mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 58mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 136g\u003c\/li\u003e\n\u003cli\u003eMaterial: Special stainless for blades, ABS, elastomer\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708021346594,"sku":"ENGI-TWNSCI-PH57","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-TWNSCI-PH57-Engineer_Japanese_Scissors_Tetsuwan_PH-57-2023-09-26T15_19_07.jpg?v=1766121529"},{"product_id":"engineer-fret-saw-spare-blades-tn-17-coarse-pitch-teeth","title":"Engineer Fret Saw Spare Blades TN-17 (Coarse Pitch Teeth)","description":"\u003cp\u003eThis page introduces the spare blades of ENGINEER Inc.'s TN-04 fret saw. Eight varieties of spare blades are available, and TN-17 has the second coarsest pitch (number of teeth per inch).\u003c\/p\u003e\n\u003cp\u003eBlades made of the SKS alloy with full heat treatment ensure great sharpness and hardness. Featuring the non-set teeth which enable smooth and beautiful cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SKS steel alloy\u003c\/li\u003e\n\u003cli\u003eContent: 12 blades\u003c\/li\u003e\n\u003cli\u003eBlade length: 130mm\u003c\/li\u003e\n\u003cli\u003eBlade width: 0.9mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.38mm\u003c\/li\u003e\n\u003cli\u003eNotches (per 25mm): 38\u003c\/li\u003e\n\u003cli\u003eWeight (per blade): 7g\u003c\/li\u003e\n\u003cli\u003eNOTE: Blade is designed to cut thin and relatively soft objects like aluminum plates, substrates, and plastic materials. Do not use this product on the thick and\/or hard materials.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708021608738,"sku":"ENGI-FRTSWB-TN17","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FRTSWB-TN17-Engineer_Fret_Saw_Spare_Blades_TN-17_Coarse_Pitch_Teeth_-2023-09-26T15_19_09.jpg?v=1766121539"},{"product_id":"engineer-connector-extractor-pas-34","title":"Engineer Connector Extractor PAS-34","description":"\u003cp\u003eENGINEER Inc.'s PAS series is a connector extractor literally suitable for extracting pin and socket contacts.\u003c\/p\u003e\n\u003cp\u003eContains an original built-in return spring that keeps injector pins inside the sleeve. It also prevents the ejector pin from causing damage and deformation while carrying or not using.\u003c\/p\u003e\n\u003cp\u003ePAS-34 is applicable to TYCO Universal Mate-N-Lok (pin \u0026amp; socket housing), TYCO Commercial Mate-N-Lok (socket housing), and MOLEX 1545 Series (socket housing). Please note that the mentioned information is just a reference and it may not work well on some models.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions:\u003c\/h3\u003e\n\u003cp\u003eInsert the extractor sleeve into the contact. Make sure to insert deeply or the extractor cannot hold the housing lance.\u003c\/p\u003e\n\u003cp\u003eWhen the insertion is completed, an ejector comes out from the grip end.\u003c\/p\u003e\n\u003cp\u003ePush the ejector, and you can remove the connector pin.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SUS303 stainless steel\u003c\/li\u003e\n\u003cli\u003eInner diameter of sleeve: φ2.7mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter of sleeve: φ3.2mm\u003c\/li\u003e\n\u003cli\u003eSize: 62mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708021641506,"sku":"ENGI-CONEXT-PAS34","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-CONEXT-PAS34-Engineer_Connector_Extractor_PAS-34-2023-09-26T15_19_09.jpg?v=1766121542"},{"product_id":"engineer-fret-saw-spare-blades-tn-18-extra-coarse-pitch-teeth","title":"Engineer Fret Saw Spare Blades TN-18 (Extra Coarse Pitch Teeth)","description":"\u003cp\u003eThis page introduces the spare blades of ENGINEER Inc.'s TN-04 fret saw. Eight varieties of spare blades are available, and TN-18 has the coarsest pitch (number of teeth per inch).\u003c\/p\u003e\n\u003cp\u003eBlades made of the SKS alloy with full heat treatment ensure great sharpness and hardness. Featuring the non-set teeth which enable smooth and beautiful cutting.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SKS steel alloy\u003c\/li\u003e\n\u003cli\u003eContent: 12 blades\u003c\/li\u003e\n\u003cli\u003eBlade length: 130mm\u003c\/li\u003e\n\u003cli\u003eBlade width: 0.9mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.4mm\u003c\/li\u003e\n\u003cli\u003eNotches (per 25mm): 35.5\u003c\/li\u003e\n\u003cli\u003eWeight (per blade): 7g\u003c\/li\u003e\n\u003cli\u003eNOTE: Blade is designed to cut thin and relatively soft objects like aluminum plates, substrates, and plastic materials. Do not use this product on the thick and\/or hard materials.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708026720546,"sku":"ENGI-FRTSWB-TN18","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FRTSWB-TN18-Engineer_Fret_Saw_Spare_Blades_TN-18_Extra_Coarse_Pitch_Teeth_-2023-09-26T15_19_09.jpg?v=1766121561"},{"product_id":"engineer-snap-ring-pliers-pz-18","title":"Engineer Snap Ring Pliers PZ-18","description":"\u003cp\u003eENGINEER Inc offers 4 different snap ring pliers (PZ-16 \/ PZ-17 \/ PZ-18 \/ PZ-19). Choose the best suited pliers based on applicable ring size and ring type.\u003c\/p\u003e\n\u003cp\u003ePZ-18 is for internal axial rings, applicable to ring size between #10~25mm.\u003c\/p\u003e\n\u003cp\u003eSlender jaws makes the work at the tight area easier.\u003c\/p\u003e\n\u003cp\u003eThe joint has built-in spring facilitating smoother grip open\/close with less fatigue even during repeated work.\u003c\/p\u003e\n\u003cp\u003eSpiked tips angled inward. Enable to close the ring and hold it tightly with little slipping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (blades): High carbon steel\u003c\/li\u003e\n\u003cli\u003eApplicable ring size: #10-25mm\u003c\/li\u003e\n\u003cli\u003eJaw tips diameter: φ1.1mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 110mm\u003c\/li\u003e\n\u003cli\u003eGrip width: 125mm\u003c\/li\u003e\n\u003cli\u003eWeight: 90g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708037861666,"sku":"ENGI-RNGPLR-PZ18","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-RNGPLR-PZ18-Engineer_Snap_Ring_Pliers_PZ-18-2023-09-26T15_41_43.jpg?v=1766121649"},{"product_id":"engineer-dust-resistant-white-inspection-gloves-finger-coat-zc-40","title":"Engineer Dust Resistant White Inspection Gloves (Finger Coat) ZC-40","description":"\u003cp\u003eWhite inspection gloves with non-slip coating ideal for works requiring accuracy such as a handling of light electrical devices, display monitor, electric bulb, compact disc, glass, semiconductor, and other precision instruments.\u003c\/p\u003e\n\u003cp\u003eThe ZC-40 has coating on fingertips.\u003c\/p\u003e\n\u003cp\u003eMade of seamless, elastic, and breathable nylon fiber, giving flexible and comfortable use.\u003c\/p\u003e\n\u003cp\u003eGloves are washable with ordinary detergent.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Wooly nylon (fabric) \/ polyurethane resin (coating)\u003c\/li\u003e\n\u003cli\u003eCoating part: Fingertips\u003c\/li\u003e\n\u003cli\u003ePalm circumference: 185~195mm\u003c\/li\u003e\n\u003cli\u003eLength (middle finger): 75~80mm\u003c\/li\u003e\n\u003cli\u003eWeight: 17g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708038975778,"sku":"ENGI-DRGLV-ZC40","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-DRGLV-ZC40-Engineer_Dust_Resistant_White_Inspection_Gloves_Finger_Coat_ZC-40-2023-09-26T15_19_09.jpg?v=1766121653"},{"product_id":"engineer-neji-saurus-js-screw-removal-pliers-pz-32","title":"Engineer Neji Saurus JS Screw Removal Pliers PZ-32","description":"\u003cp\u003eThis Neji Saurus is special. It is a military specification, customized screw remover.\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003eCan remove stripped, rusted, Torx, and dome headed screws.\u003c\/p\u003e\n\u003cp\u003eNeji Saurus series' symbolic vertical serrations, attached on the jaw tips, hold almost any screw head.\u003c\/p\u003e\n\u003cp\u003eThe jaws teeth is inter-meshed. It holds extremely-thin plates and other thicker materials very tightly without slippage.\u003c\/p\u003e\n\u003cp\u003eLightweight, twist-resistance T-shaped handles alleviate pain, suitable for heavy use.\u003c\/p\u003e\n\u003cp\u003eCutter on the inner side of the jaws, able to cut φ1.2mm copper wires.\u003c\/p\u003e\n\u003cp\u003eBlack oxide coating, stronger rust resistance and weaker light reflection.\u003c\/p\u003e\n\u003cp\u003eAwarded design.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): High carbon steel with jet black coating\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPR)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with φ3~9.5mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 160x56x15mm\u003c\/li\u003e\n\u003cli\u003ePliers head length: 29mm\u003c\/li\u003e\n\u003cli\u003eCutter length: 12mm\u003c\/li\u003e\n\u003cli\u003eCutting capacity: φ1.2mm (copper wire)\u003c\/li\u003e\n\u003cli\u003eWeight: 125g\u003c\/li\u003e\n\u003cli\u003eHardness: HRC60±2\u003c\/li\u003e\n\u003cli\u003eCannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust.\u003c\/li\u003e\n\u003cli\u003eMake sure to apply this tool to a screw head, but not to screw thread.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708039565602,"sku":"ENGI-NJIPLR-PZ32","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-NJIPLR-PZ32-Engineer_Neji_Saurus_JS_Screw_Removal_Pliers_PZ-32-2023-09-26T15_19_07.jpg?v=1766121665"},{"product_id":"engineer-esd-safe-reverse-blade-micro-cutter-nz-13g","title":"Engineer ESD-safe Reverse Blade Micro Cutter NZ-13G","description":"\u003cp\u003eNZ-13G is a lightweight, ESD-compatible nippers suitable to cut an IC lead of a narrow-pitch QFP or SOP.\u003c\/p\u003e\n\u003cp\u003eSharp ultrafine tip (0.3 mm \/ double-edged 0.6 mm) facilitates precise cutting.\u003c\/p\u003e\n\u003cp\u003eThe grip is ESD-compatible, anti-static, eco-friendly, and comfort-to-hold.\u003c\/p\u003e\n\u003cp\u003eBy holding the nippers vertically against the circuit board, the reversed blades enable the cutting in front of the user with the clear view of cutting object.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): High carbon steel\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPR)\u003c\/li\u003e\n\u003cli\u003eCutting capacity: Copper wire (single) \/ φ0.6mm\u003c\/li\u003e\n\u003cli\u003eSize: 125mm\u003c\/li\u003e\n\u003cli\u003eGrip width: 45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 35g\u003c\/li\u003e\n\u003cli\u003eSurface resistance value: 1×10⁶～10⁷Ω\u003c\/li\u003e\n\u003cli\u003eThe product is uninsulated\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708039893282,"sku":"ENGI-ESDCUT-NZ13G","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ESDCUT-NZ13G-Engineer_ESD-safe_Reverse_Blade_Micro_Cutter_NZ-13G-2023-09-26T15_19_08.jpg?v=1766121669"},{"product_id":"engineer-pin-extractor-ss-31","title":"Engineer Pin Extractor SS-31","description":"\u003cp\u003eENGINEER Inc.'s SS series is a pin extractor specialized in ejecting pins from socket terminals and is applicable to both female and male terminal housings.\u003c\/p\u003e\n\u003cp\u003eVery easy steps to extract the pin: insert a sleeve into socket terminal, then press the ejector.\u003c\/p\u003e\n\u003cp\u003eSS-31 is applicable to JST ML \u0026amp; EL Series (pin \u0026amp; socket housing), and MOLEX 1625 Series (socket housing). Please note that the mentioned information is just a reference and it may not work well on some models.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions:\u003c\/h3\u003e\n\u003cp\u003eInsert the extractor sleeve into the socket terminal. Make sure to insert deeply or the extractor cannot hold the housing lance.\u003c\/p\u003e\n\u003cp\u003eWhen insertion completed, push forward the ejector on the grip end, and you can remove the pin.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SUS303 stainless steel\u003c\/li\u003e\n\u003cli\u003eInner diameter of sleeve: φ2.1mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter of sleeve: φ2.7mm\u003c\/li\u003e\n\u003cli\u003eSize: 85mm\u003c\/li\u003e\n\u003cli\u003eWeight: 24g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708040745250,"sku":"ENGI-PINEXT-SS31","price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-PINEXT-SS31-Engineer_Pin_Extractor_SS-31-2023-09-26T15_19_09.jpg?v=1766121680"},{"product_id":"engineer-slip-joint-pliers-with-screw-removal-function-245mm-pz-82","title":"Engineer Slip Joint Pliers With Screw Removal Function 245mm PZ-82","description":"\u003cp\u003eThe Engineer PZ-82 are multifunctional slip-joint pliers with high leverage thanks to their long handles, this means they excel at applying maximum torque to stubborn nuts and bolts. In addition, unlike most pliers, they are wonderful at taking out stuck and rusted screws, thanks to their unique screw removal jaws - a technology that Engineer is most proud of! \u003c\/p\u003e\n\u003cp\u003eQuick and simple adjustment, just press the button on the joint, slide the jaws and hold the object firmly in the pliers' grip. The vertical grooves on the tip of the jaws bite down into screw heads, meaning they can easily remove stripped or rusted torx and dome headed screws.\u003c\/p\u003e\n\u003cp\u003eThe jaws and handles have incredible grip, making them suitable for water-related work and work around oil and grease. A must have tool for plumbers, mechanics and engineers.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Carbon steel\u003c\/li\u003e\n\u003cli\u003eCompatible screw head diameter: 3 to 9.5 mm\u003c\/li\u003e\n\u003cli\u003eVertical groove hardness: HRC60±2\u003c\/li\u003e\n\u003cli\u003eGripping width: Pipe - 5 to 50mm, Nut 5 to 47mm\u003c\/li\u003e\n\u003cli\u003eTotal length: 245 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 350g\u003c\/li\u003e\n\u003cli\u003eMade in Taiwan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708043464994,"sku":"ENGI-JNTPLR-PZ81","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/Engineer-Slip-Joint-Pliers-With-Screw-Removal-Function-245mm-PZ-82-1-2024-11-20T08_00_40.656Z.webp?v=1766121699"},{"product_id":"engineer-neji-saurus-rx-screw-removal-pliers-pz-59","title":"Engineer Neji Saurus RX Screw Removal Pliers PZ-59","description":"\u003cp\u003eThe Engineer Neji Saurus PZ-59 is a multifunctional pliers worth having in your collection. They are designed for an easy bite, tighter hold, and slipping-proof.\u003c\/p\u003e\n\u003cp\u003eMade for auto mechanics, builders and for professionals in general these Japanese pliers can remove stripped, rusted, torx (six-lobed), and dome headed screws.\u003c\/p\u003e\n\u003cp\u003eThe jaws are equipped both with horizontal and vertical serrations and have unique inter-meshed teeth. It also features a cutter on the inner side of the jaws which is able to cut φ3.2mm steel wires.\u003c\/p\u003e\n\u003cp\u003eCapable of holding extremely thin materials (e.g. ultra-thin metal plate) without slippage.\u003c\/p\u003e\n\u003cp\u003eThe lightweight, twist-resistance T-shaped handles materializes less pain and fatigue.\u003c\/p\u003e\n\u003cp\u003eStrap hole on grip end, easy-to-carry, hard-to-lose.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): High carbon steel\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPR)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with φ3~15mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 204x32x19mm\u003c\/li\u003e\n\u003cli\u003ePliers head length: 27.7mm\u003c\/li\u003e\n\u003cli\u003eWeight: 300g\u003c\/li\u003e\n\u003cli\u003eCutting capacity: φ3.2mm steel wire\u003c\/li\u003e\n\u003cli\u003eCannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust.\u003c\/li\u003e\n\u003cli\u003eMake sure to apply this tool to a screw head, but not to screw thread.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708043497762,"sku":"ENGI-NJIPLR-PZ59","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-NJIPLR-PZ59-Engineer_Neji_Saurus_RX_Screw_Removal_Pliers_PZ-59-2023-09-26T15_19_08.jpg?v=1766121701"},{"product_id":"engineer-multipurpose-scissors-ph-50","title":"Engineer Multipurpose Scissors PH-50","description":"\u003cp\u003eThe Engineer Iron Arm Scissors cut special materials that are difficult to cut with ordinary scissors easily.\u003c\/p\u003e\n\u003cp\u003eThey can be used for trimming various objects such as nylon fiber, rope, cabtire cord, ultra-fine fibers such as Kevlar or cotton-coated wires.\u003c\/p\u003e\n\u003cp\u003eFine and flush cut of copper or conductor wire.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCutting capacity: Vinyl cabtyre (2mm² x 4), coaxial cable (5C), cotton coated cord (φ8mm), trarope (φ10mm), aramid fiber (various types), aluminum plate, copper plate (0.5mm), PP plate (1mm), Leather belt (4mm)\u003c\/li\u003e\n\u003cli\u003eSize: 170 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 58 g\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel and PE\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708043530530,"sku":"ENGI-MPUSCI-PH50","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-MPUSCI-PH50-Engineer_Multipurpose_Scissors_PH-50-2023-09-26T15_19_07.jpg?v=1766121703"},{"product_id":"engineer-bare-terminal-set-pa-91","title":"Engineer Bare Terminal Set PA-91","description":"\u003cp\u003ePA-91 is a set of frequently-used bare crimp terminals and connectors contained in a plastic case.\u003c\/p\u003e\n\u003cp\u003eR-type and Y-type terminals contained with 5 and 3 different sizes, respectively.\u003c\/p\u003e\n\u003cp\u003eFor crimping purpose.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents (sectional area \/ screw dia.×number): Bare terminal R (0.5mm²\/3mm×10 pcs, 1.25mm²\/3mm×10pcs, 1.25mm²\/4mm×10pcs, 2.0mm²\/5mm×10pcs, 5.5mm²\/6mm×5pcs), bare terminal Y(1.25mm²\/4mm×10pcs, 2.0mm²\/5mm×10pcs, 5.5mm²\/6mm×5pcs)\u003c\/li\u003e\n\u003cli\u003eMaterial: Copper, tin plated\u003c\/li\u003e\n\u003cli\u003eWeight: 70g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708043727138,"sku":"ENGI-TERMST-PA91","price":14.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-TERMST-PA91-Engineer_Bare_Terminal_Set_PA-91-2023-09-26T15_19_08.jpg?v=1766121706"},{"product_id":"engineer-e-ring-3-4mm-pliers-pz-01","title":"Engineer E-Ring (φ3~4mm) Pliers PZ-01","description":"\u003cp\u003eEngineer's PZ-01 will make your E-ring installment and\/or detachment more convenient and comfortable.\u003c\/p\u003e\n\u003cp\u003eThe pliers jaw has recessed tip. This makes E-ring fastening and removal easier.\u003c\/p\u003e\n\u003cp\u003eMagnetized tip enables more convenient and stable E-ring holding.\u003c\/p\u003e\n\u003cp\u003eSpecially designed box joint structure diminishes looseness.\u003c\/p\u003e\n\u003cp\u003eAlso applicable to maintenance of OA equipment, car, and bicycle.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (blades): High carbon steel\u003c\/li\u003e\n\u003cli\u003eApplicable ring size: φ3~4mm (ring size refers to the diameter of a grooved shaft which E-ring retains)\u003c\/li\u003e\n\u003cli\u003eOverall length: 150mm\u003c\/li\u003e\n\u003cli\u003eJaw length: 45mm\u003c\/li\u003e\n\u003cli\u003eGrip width: 48mm\u003c\/li\u003e\n\u003cli\u003eWeight: 73g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708044415266,"sku":"ENGI-ERGPLR-PZ01","price":22.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ERGPLR-PZ01-Engineer_E-Ring_3_4mm_Pliers_PZ-01-2023-09-26T15_19_08.jpg?v=1766121709"},{"product_id":"engineer-connector-extractor-pas-33","title":"Engineer Connector Extractor PAS-33","description":"\u003cp\u003eENGINEER Inc.'s PAS series is a connector extractor literally suitable for extracting pin and socket contacts.\u003c\/p\u003e\n\u003cp\u003eContains an original built-in return spring that keeps injector pins inside the sleeve. It also prevents the ejector pin from causing damage and deformation while carrying or not using.\u003c\/p\u003e\n\u003cp\u003ePAS-33 is applicable to JST L\u0026amp;LL Series (pin \u0026amp; socket housing), MOLEX 1545 Series (pin housing), and MOLEX 3191 Series (pin \u0026amp; socket housing). Please note that the mentioned information is just a reference and it may not work well on some models.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions:\u003c\/h3\u003e\n\u003cp\u003eInsert the extractor sleeve into the contact. Make sure to insert deeply or the extractor cannot hold the housing lance.\u003c\/p\u003e\n\u003cp\u003eWhen the insertion is completed, an ejector comes out from the grip end.\u003c\/p\u003e\n\u003cp\u003ePush the ejector, and you can remove the connector pin.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SUS303 stainless steel\u003c\/li\u003e\n\u003cli\u003eInner diameter of sleeve: φ3.1mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter of sleeve: φ3.6mm\u003c\/li\u003e\n\u003cli\u003eSize: 62mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708048281890,"sku":"ENGI-CONEXT-PAS33","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-CONEXT-PAS33-Engineer_Connector_Extractor_PAS-33-2023-09-26T15_19_09.jpg?v=1766121720"},{"product_id":"engineer-anti-static-bags-s-size-100-pieces-zc-92","title":"Engineer Anti-static Bags S Size 100 Pieces ZC-92","description":"\u003cp\u003eEngineer's anti-static bag is useful to handle active ESDS components.\u003c\/p\u003e\n\u003cp\u003eThe see-through bag's makes easy to check what is inside.\u003c\/p\u003e\n\u003cp\u003eLong-lasting surface resistivity with little humidity dependency.\u003c\/p\u003e\n\u003cp\u003eSurfactant unused, non-contaminated material used.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Polyethylene\u003c\/li\u003e\n\u003cli\u003eColor: Blue transparent\u003c\/li\u003e\n\u003cli\u003eSize: 100×150mm\u003c\/li\u003e\n\u003cli\u003eSurface resistance value: 5×10¹⁰Ω or less\u003c\/li\u003e\n\u003cli\u003eThickness: 0.05mm\u003c\/li\u003e\n\u003cli\u003eContents: 100 pcs.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708048838946,"sku":"ENGI-ASTBAG-ZC92","price":11.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ASTBAG-ZC92-Engineer_Anti-static_Bags_S_Size_100_Pieces_ZC-92-2023-09-26T15_19_09.jpg?v=1766121724"},{"product_id":"engineer-conductive-gloves-finger-coat-zc-46","title":"Engineer Conductive Gloves (Finger Coat) ZC-46","description":"\u003cp\u003eStatic conductive gloves with non-slip coating ideal for works requiring accuracy such as a handling of light electrical devices, display monitor, electric bulb, compact disc, glass, semiconductor, and other precision instruments.\u003c\/p\u003e\n\u003cp\u003eThe ZC-46 has coating on fingertips.\u003c\/p\u003e\n\u003cp\u003eFingertips fiber mixed with copper sulfide providing excellent conductivity, prevents friction and contact electrification.\u003c\/p\u003e\n\u003cp\u003eMade of seamless, elastic, and breathable nylon fiber, giving flexible and comfortable use.\u003c\/p\u003e\n\u003cp\u003eGloves are washable with ordinary detergent. Conductivity lasts longer even repeated washes.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Nylon 90% \u0026amp; Acryl 10% (fabric) \/ polyurethane resin (coating)\u003c\/li\u003e\n\u003cli\u003eCoating part: Fingertips\u003c\/li\u003e\n\u003cli\u003eSurface resistivity: 1×10⁵～10⁶Ω\u003c\/li\u003e\n\u003cli\u003ePalm circumference: 185~195mm\u003c\/li\u003e\n\u003cli\u003eLength (middle finger): 75~80mm\u003c\/li\u003e\n\u003cli\u003eWeight: 18.5g\u003c\/li\u003e\n\u003cli\u003eNOTE: To prevent conductivity deterioration, refrain from washing with detergents including chlorine-based oxidizer.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708049297698,"sku":"ENGI-CNDGLV-ZC46","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-CNDGLV-ZC46-Engineer_Conductive_Gloves_Finger_Coat_ZC-46-2023-09-26T15_19_09.jpg?v=1766121731"},{"product_id":"engineer-wire-stripper-for-thick-wire-pa-07","title":"Engineer Wire Stripper for Thick Wire PA-07","description":"\u003cp\u003eENGINEER Inc.'s PA-07 will be your best choice if you are looking for a high-spec wire stripper with excellent sharpness and durability.\u003c\/p\u003e\n\u003cp\u003eSuitable for stripping both solid and stranded insulated wires.\u003c\/p\u003e\n\u003cp\u003eCutter part made of anti-corrosive, abrasion-proof carbon steel. Sharp and precise edges facilitate round finish without damaging core wires.\u003c\/p\u003e\n\u003cp\u003eOil resistant and eco-friendly elastomer grip designed to fits nicely to user's hand.\u003c\/p\u003e\n\u003cp\u003eEasy-to-adjust, uniquely developed joint screw.\u003cbr\u003e\n\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (cutter): S55C carbon steel\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPR)\u003c\/li\u003e\n\u003cli\u003eCutting capacity: diameter 0.8~2.5mm\u003c\/li\u003e\n\u003cli\u003eSize: 175 × 50mm\u003c\/li\u003e\n\u003cli\u003eWeight: 134g\u003c\/li\u003e\n\u003cli\u003eFor more details on how to maintain the joint screw, see https:\/\/www.engineertools-jp.com\/pa05060714\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708050116898,"sku":"ENGI-WIRSTR-PA07","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-WIRSTR-PA07-Engineer_Wire_Stripper_for_Thick_Wire_PA-07-2023-09-26T15_19_07.jpg?v=1766121747"},{"product_id":"engineer-fret-saw-spare-blades-tn-15-intermediate-pitch-teeth","title":"Engineer Fret Saw Spare Blades TN-15 (Intermediate Pitch Teeth)","description":"\u003cp\u003eThis page introduces the spare blades of ENGINEER Inc.'s TN-04 fret saw. Eight varieties of spare blades are available, and TN-15 has medium pitch (number of teeth per inch).\u003c\/p\u003e\n\u003cp\u003eBlades made of the SKS alloy with full heat treatment ensure great sharpness and hardness. Featuring the non-set teeth which enable smooth and beautiful cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SKS steel alloy\u003c\/li\u003e\n\u003cli\u003eContent: 12 blades\u003c\/li\u003e\n\u003cli\u003eBlade length: 130mm\u003c\/li\u003e\n\u003cli\u003eBlade width: 0.7mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.34mm\u003c\/li\u003e\n\u003cli\u003eNotches (per 25mm): 43\u003c\/li\u003e\n\u003cli\u003eWeight (per blade): 6g\u003c\/li\u003e\n\u003cli\u003eNOTE: Blade is designed to cut thin and relatively soft objects like aluminum plates, substrates, and plastic materials. Do not use this product on the thick and\/or hard materials.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708050215202,"sku":"ENGI-FRTSWB-TN15","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FRTSWB-TN15-Engineer_Fret_Saw_Spare_Blades_TN-15_Intermediate_Pitch_Teeth_-2023-09-26T15_19_09.jpg?v=1766121749"},{"product_id":"engineer-spare-lens-35x-sl-88","title":"Engineer Spare Lens 3.5X SL-88","description":"\u003cp\u003eThe interchangeable magnifying lens with 3.5× magnification for Engineer's SL-80 Head Loupe. This is one of the optional lens available at our shop.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLens magnification: 3.5X\u003c\/li\u003e\n\u003cli\u003eLens specification: White lens\u003c\/li\u003e\n\u003cli\u003eWeight: 42g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708050477346,"sku":"ENGI-SPLENS-SL88","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-SPLENS-SL88-Engineer_Spare_Lens_3_5X_SL-88-2023-09-26T15_19_07.jpg?v=1766121759"},{"product_id":"engineer-neji-saurus-m2-screw-removal-pliers-pz-57","title":"Engineer Neji Saurus M2 Screw Removal Pliers PZ-57","description":"\u003cp\u003eENGINEER Inc.'s PZ-57 is one of the Neji Saurus series products. Specifically designed to remove small screws and small components on the PCB.\u003c\/p\u003e\n\u003cp\u003eCan remove small-sized, low profiled, rusty, and tamper-proof screw heads.\u003c\/p\u003e\n\u003cp\u003eBoth horizontal and vertical serrations equipped on the jaws. Easy bite, tighter hold, and slipping-proof.\u003c\/p\u003e\n\u003cp\u003eTPE grips resistant to ESD and oil, suitable to handling electronic components.\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003eStrap hole on grip end, easy-to-carry, hard-to-lose.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): S58C high carbon steel\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPE)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with φ2~3.5mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 120x52x11mm\u003c\/li\u003e\n\u003cli\u003eWeight: 100g\u003c\/li\u003e\n\u003cli\u003eSurface resistivity: 1×10⁶~10⁷Ω\u003c\/li\u003e\n\u003cli\u003eCannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust.\u003c\/li\u003e\n\u003cli\u003eMake sure to apply this tool to a screw head, but not to screw thread.\u003c\/li\u003e\n\u003cli\u003eNOTE: This tool is uninsulated; avoid using it to electrically live objects.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708050542882,"sku":"ENGI-NJIPLR-PZ57","price":22.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-NJIPLR-PZ57-Engineer_Neji_Saurus_M2_Screw_Removal_Pliers_PZ-57-2023-09-26T15_19_08.jpg?v=1766121761"},{"product_id":"engineer-slip-joint-pliers-multipurpose-combination-pliers-203mm-pc-07","title":"Engineer Slip Joint Pliers Multipurpose Combination Pliers 203mm PC-07","description":"\u003cp\u003eThese slip-joint pliers are the ideal multipurpose pliers for your toolkit.\u003c\/p\u003e\n\u003cp\u003eMade by Japan's renowned Engineer, you can be sure they're of the highest quality, with smooth opening and shutting every time. They're fantastic for gripping, cutting, bending and fastening.\u003c\/p\u003e\n\u003cp\u003eMade out of quality carbon steel, with a rust-resistant plating, these pliers are extremely durable. They come highly recommended for motorcycle and car maintenance, and also for DIY projects around the home.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Carbon steel\u003c\/li\u003e\n\u003cli\u003eTotal length: 203mm\u003c\/li\u003e\n\u003cli\u003eTip length: 35mm\u003c\/li\u003e\n\u003cli\u003eGrip width: 46mm\u003c\/li\u003e\n\u003cli\u003eMaximum opening: 25mm\u003c\/li\u003e\n\u003cli\u003eCutting capacity: Soft wire (2.6mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 270g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708050706722,"sku":"ENGI-ALPPLR-PC08","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/Engineer-Slip-Joint-Pliers-Multipurpose-Combination-Pliers-203mm-PC-07-1-2025-04-28T04_59_30.136Z.jpg?v=1766121770"},{"product_id":"engineer-conductive-gloves-palm-coat-zc-49","title":"Engineer Conductive Gloves (Palm Coat) ZC-49","description":"\u003cp\u003eStatic conductive gloves with non-slip coating ideal for works requiring accuracy such as a handling of light electrical devices, display monitor, electric bulb, compact disc, glass, semiconductor, and other precision instruments.\u003c\/p\u003e\n\u003cp\u003eThe ZC-49 has a coating on a palm.\u003c\/p\u003e\n\u003cp\u003eFingertips fiber mixed with copper sulfide providing excellent conductivity, prevents friction and contact electrification.\u003c\/p\u003e\n\u003cp\u003eMade of seamless, elastic, and breathable nylon fiber, giving flexible and comfortable use.\u003c\/p\u003e\n\u003cp\u003eGloves are washable with ordinary detergent. Conductivity lasts longer even repeated washes.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Nylon 90% \u0026amp; Acryl 10% (fabric) \/ polyurethane resin (coating)\u003c\/li\u003e\n\u003cli\u003eCoating part: Palm\u003c\/li\u003e\n\u003cli\u003eSurface resistivity: 1×10⁵～10⁶Ω\u003c\/li\u003e\n\u003cli\u003ePalm circumference: 185~195mm\u003c\/li\u003e\n\u003cli\u003eLength (middle finger): 75~80mm\u003c\/li\u003e\n\u003cli\u003eWeight: 21.5g\u003c\/li\u003e\n\u003cli\u003eNOTE: To prevent conductivity deterioration, refrain from washing with detergents including chlorine-based oxidizer.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708050903330,"sku":"ENGI-CNDGLV-ZC49","price":22.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-CNDGLV-ZC49-Engineer_Conductive_Gloves_Palm_Coat_ZC-49-2023-09-26T15_19_09.jpg?v=1766121782"},{"product_id":"engineer-pin-extractor-ss-30","title":"Engineer Pin Extractor SS-30","description":"\u003cp\u003eENGINEER Inc.'s SS series is a pin extractor specialized in ejecting pins from socket terminals and is applicable to both female and male terminal housings.\u003c\/p\u003e\n\u003cp\u003eVery easy steps to extract the pin: insert a sleeve into socket terminal, then press the ejector.\u003c\/p\u003e\n\u003cp\u003eSS-30 is applicable to TYCO Mini Universal Mate-N-Lok (pin \u0026amp; socket housing), and MOLEX 1625 Series (pin housing). Please note that the mentioned information is just a reference and it may not work well on some models.\u003c\/p\u003e\n\u003ch3\u003eInstructions:\u003c\/h3\u003e\n\u003cp\u003eInsert the extractor sleeve into the socket terminal. Make sure to insert deeply or the extractor cannot hold the housing lance.\u003c\/p\u003e\n\u003cp\u003eWhen insertion completed, push forward the ejector on the grip end, and you can remove the pin.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SUS303 stainless steel\u003c\/li\u003e\n\u003cli\u003eInner diameter of sleeve: φ1.9mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter of sleeve: φ2.5mm\u003c\/li\u003e\n\u003cli\u003eSize: 85mm\u003c\/li\u003e\n\u003cli\u003eWeight: 24g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708051198242,"sku":"ENGI-PINEXT-SS30","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-PINEXT-SS30-Engineer_Pin_Extractor_SS-30-2023-09-26T15_19_09.jpg?v=1766121785"},{"product_id":"engineer-handy-crimp-tool-complete-set-pad-02","title":"Engineer Handy Crimp Tool Complete Set PAD-02","description":"\u003cp\u003eENGINEER Inc.'s PAD-02 contains all necessary tools for crimping activities. It is an all-in-one crimp tool kit with exclusive carrying case.\u003c\/p\u003e\r\n\u003cp\u003eSuitable for crimping open barrel terminal with ease.\u003c\/p\u003e\r\n\u003cp\u003eThe crimper also has wire stripper and cutter adjacent to pivot point.\u003c\/p\u003e\r\n\u003cp\u003eThe grip is made of oil-resistant elastomer, and its ergonomic design facilitates crimping strength adjustment.\u003c\/p\u003e\r\n\u003cp\u003eDies are easy to remove and replace by using the attached hex key wrench.\u003c\/p\u003e\r\n\u003cp\u003e6 connectable parts box, useful to store terminals and small devices.\u003c\/p\u003e\r\n\u003ch3\u003eDetails\u003c\/h3\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eContents: crimper, 3 interchangeable dies, 2.5mm hex key wrench, connectable parts box (6 pieces), and carrying case\u003c\/li\u003e\r\n  \u003cli\u003eMaterial: special alloy steel (crimper frame and die) \/ thermoplastic elastomer (crimper grip) \/ high density polyethylene (case)\u003c\/li\u003e\r\n  \u003cli\u003eSize (crimper): 205×55×18mm\u003c\/li\u003e\r\n  \u003cli\u003eSize (dies): 39.9×24.9×7.9mm (No. 11) \/ 40×25×8mm (No. 12) \/ 43×27×9mm (No. 13)\u003c\/li\u003e\r\n  \u003cli\u003eSize (case): 300×200×63mm\u003c\/li\u003e\r\n  \u003cli\u003eWeight: 256g (crimper) \/ 23g (No. 11 die), 32g (No. 12 die), 36g (No. 13 die) \/ approx. 910g (case)\u003c\/li\u003e\r\n  \u003cli\u003eFor more details on how-to-use guidance, see https:\/\/www.engineertools-jp.com\/pad111213\u003c\/li\u003e\r\n  \u003cli\u003eMade in Japan\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708055359778,"sku":"ENGI-CRPSET-PAD02","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-CRPSET-PAD02-Engineer_Handy_Crimp_Tool_Complete_Set_PAD-02-2023-09-26T15_19_08.jpg?v=1766121796"},{"product_id":"engineer-electronic-snips-straight-point-ph-33","title":"Engineer Electronic Snips (Straight Point) PH-33","description":"\u003cp\u003eEngineer's Electronic Snips is the best solution for delicate cutting such as work related to printed circuit board. PH-33 is a straight-point model.\u003c\/p\u003e\n\u003cp\u003eSaw-toothed cutting edge useful to cut objects with little slipping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStraight-pointed\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSize (overall length): 145mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 28mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 1.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 31g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708056080674,"sku":"ENGI-ELESNP-PH33","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ELESNP-PH33-Engineer_Electronic_Snips_Straight_Point_PH-33-2023-09-26T15_19_08.jpg?v=1766121799"},{"product_id":"engineer-fret-saw-spare-blades-tn-16-intermediate-coarse-pitch-teeth","title":"Engineer Fret Saw Spare Blades TN-16 (Intermediate Coarse Pitch Teeth)","description":"\u003cp\u003eThis page introduces the spare blades of ENGINEER Inc.'s TN-04 fret saw. Eight varieties of spare blades are available, and TN-16 has moderately coarse pitch (number of teeth per inch).\u003c\/p\u003e\n\u003cp\u003eBlades made of the SKS alloy with full heat treatment ensure great sharpness and hardness. Featuring the non-set teeth which enable smooth and beautiful cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SKS steel alloy\u003c\/li\u003e\n\u003cli\u003eContent: 12 blades\u003c\/li\u003e\n\u003cli\u003eBlade length: 130mm\u003c\/li\u003e\n\u003cli\u003eBlade width: 0.9mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.36m\u003c\/li\u003e\n\u003cli\u003eNotches (per 25mm): 40.5\u003c\/li\u003e\n\u003cli\u003eWeight (per blade): 6g\u003c\/li\u003e\n\u003cli\u003eNOTE: Blade is designed to cut thin and relatively soft objects like aluminum plates, substrates, and plastic materials. Do not use this product on the thick and\/or hard materials.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708056506658,"sku":"ENGI-FRTSWB-TN16","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-FRTSWB-TN16-Engineer_Fret_Saw_Spare_Blades_TN-16_Intermediate_Coarse_Pitch_Teeth_-2023-09-26T15_19_09.jpg?v=1766121805"},{"product_id":"engineer-neji-saurus-screw-removal-pliers-pz-78","title":"Engineer Neji Saurus Screw Removal Pliers PZ-78","description":"\u003cp\u003eEngineer's Neji Saurus is a must-have tool for electricians. This Japanese combination pliers with screw removal jaws can perform various works such as removing stripped, rusted, torx (six-lobed), and dome headed screws.\u003c\/p\u003e\n\u003cp\u003e21mm side cutting blades enables single cutting of dia 2.6mm x 3 cores VVF.\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003eHigh leverage structure gives 30 % more powerful cutting compared with conventional pliers.\u003c\/p\u003e\n\u003cp\u003e2 ways anti-slipping gripping jaw: the vertical serrations can firmly grip a screw head while horizontal serrations can firmly hold a tie band and a thin plate.\u003c\/p\u003e\n\u003cp\u003eCrimper for bare terminals between 1.25 ～ 3.5 mm².\u003c\/p\u003e\n\u003cp\u003eOil-resistant T-shaped grip prevents the handle sleeve from twisting or turning round.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): High carbon Steel\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPR)\u003c\/li\u003e\n\u003cli\u003eCutting capacity: dia. 2.6mm x 3 cores (Flat cable) \/ dia. 3.2mm (Steel wire) \/ dia. 4mm (Copper wire) \/ dia. 2mm (Stainless wire) \/ 8mm² (Stranded wire)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with dia. 3 to 9.mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 225×54×17mm\u003c\/li\u003e\n\u003cli\u003eWeight: 350g\u003c\/li\u003e\n\u003cli\u003eCannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust.\u003c\/li\u003e\n\u003cli\u003eMake sure to apply this tool to a screw head, but not to screw thread.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708056965410,"sku":"ENGI-COMPLR-PZ78","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-COMPLR-PZ78-Engineer_Neji_Saurus_Screw_Removal_Pliers_PZ-78-2023-09-26T15_19_08.jpg?v=1766121810"},{"product_id":"engineer-connector-extractor-pas-31","title":"Engineer Connector Extractor PAS-31","description":"\u003cp\u003eENGINEER Inc.'s PAS series is a connector extractor literally suitable for extracting pin and socket contacts.\u003c\/p\u003e\n\u003cp\u003eContains an original built-in return spring that keeps injector pins inside the sleeve. It also prevents the ejector pin from causing damage and deformation while carrying or not using.\u003c\/p\u003e\n\u003cp\u003ePAS-31 is applicable to JST ML \u0026amp; EL Series (pin \u0026amp; socket housing), and MOLEX 1625 Series (socket housing). Please note that the mentioned information is just a reference and it may not work well on some models.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions\u003c\/h3\u003e\n\u003cp\u003eInsert the extractor sleeve into the contact. Make sure to insert deeply or the extractor cannot hold the housing lance.\u003c\/p\u003e\n\u003cp\u003eWhen the insertion is completed, an ejector comes out from the grip end.\u003c\/p\u003e\n\u003cp\u003ePush the ejector, and you can remove the connector pin.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: SUS303 stainless steel\u003c\/li\u003e\n\u003cli\u003eInner diameter of sleeve: φ2.1mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter of sleeve: φ2.7mm\u003c\/li\u003e\n\u003cli\u003eSize: 62mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708058276130,"sku":"ENGI-CONEXT-PAS31","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-CONEXT-PAS31-Engineer_Connector_Extractor_PAS-31-2023-09-26T15_19_09.jpg?v=1766121813"},{"product_id":"engineer-locking-scissor-clamp-hemostat-curved-point-ph-04","title":"Engineer Locking Scissor Clamp Hemostat (Curved Point) PH-04","description":"\u003cp\u003eEngineer's Lock Holder is an utility tool for holding and clipping purpose. PH-04 is a curved-point model.\u003c\/p\u003e\n\u003cp\u003eRatchet handles enable smooth clipping with the object being kept lock. Releasing is also easy.\u003c\/p\u003e\n\u003cp\u003e3-position snap lock suitable for delicate adjustment.\u003c\/p\u003e\n\u003cp\u003eSerrated point edge covers various activities including electronic device assembly, soldering, precise cramping, and clipping of bike\/motorcycle oil hoses.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCurve-pointed\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSize (L×H): 150mm×80mm\u003c\/li\u003e\n\u003cli\u003eWeight: 40g\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708059586850,"sku":"ENGI-LOKHLD-PH04","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-LOKHLD-PH04-Engineer_Locking_Scissor_Clamp_Hemostat_Curved_Point_PH-04-2023-09-26T15_19_08.jpg?v=1766121824"},{"product_id":"engineer-neji-saurus-z-long-nose-screw-removal-pliers-pz-60","title":"Engineer Neji Saurus Z Long Nose Screw Removal Pliers PZ-60","description":"\u003cp\u003eThe Engineer PZ-60 Pliers is one of the Neji Saurus series products. A long nose pliers with an easy bite, tighter hold, and slipping-proof, designed to remove screws in a confined, recess space.\u003c\/p\u003e\n\u003cp\u003eThese Japanese pliers are equipped with both horizontal and vertical serrations on the jaws and can remove stripped, rusted, torx (six-lobed), and dome headed screws. They also feature a cutter on the inner side of the jaws which is able to cut φ1.2mm copper wires.\u003c\/p\u003e\n\u003cp\u003eThe jaws have unique inter-meshed teeth. Capable of holding extremely thin materials (e.g. ultrathin metal plate) without slippage.\u003c\/p\u003e\n\u003cp\u003eLightweight, twist-resistance T-shaped handles materializes less pain and fatigue.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (body): High carbon steel\u003c\/li\u003e\n\u003cli\u003eMaterial (grip): Elastomer (TPR)\u003c\/li\u003e\n\u003cli\u003eScrew removing capacity: screw head with φ2~5.5mm\u003c\/li\u003e\n\u003cli\u003eSize (W x H x D): 193x57x15mm\u003c\/li\u003e\n\u003cli\u003ePliers head length: 56mm\u003c\/li\u003e\n\u003cli\u003eWeight: 180g\u003c\/li\u003e\n\u003cli\u003eCutting capacity: φ1.2mm copper wire\u003c\/li\u003e\n\u003cli\u003eCannot be used with tapping screws, drilling screws, coarse threads, or screws that are fully adhered with glue or rust.\u003c\/li\u003e\n\u003cli\u003eMake sure to apply this tool to a screw head, not to screw thread.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708060078370,"sku":"ENGI-NJIPLR-PZ60","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-NJIPLR-PZ60-Engineer_Neji_Saurus_Z_Long_Nose_Screw_Removal_Pliers_PZ-60-2023-09-26T15_19_08.jpg?v=1766121827"},{"product_id":"engineer-neji-saurus-xp-screw-removal-pliers-pz-54","title":"Engineer Neji Saurus XP Screw Removal Pliers PZ-54","description":"\u003cp\u003eThe Neji Saurus XP is a pair of combination pliers that can remove problematic screws with ease. This product is suitable for removing pan head screws.\u003c\/p\u003e\n\u003cp\u003eLike other Neji Saurus pliers, this type also has Patented double-directional serrations to firmly grip the tricky screw head with little slippage.\u003c\/p\u003e\n\u003cp\u003eIt also has functions of slip-joint pliers: you can adjust its jaw opening in two ways. With a wire cutter built into the pliers, just behind the jaws, this multipurpose tool is sure to come in handy more often than not.\u003c\/p\u003e\n\u003cp\u003eThe jaws are thinner and longer than those of normal combination pliers, so you can handle removal tasks in confined areas.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial (jaws and joint): Carbon steel\u003c\/li\u003e\n\u003cli\u003eLength: 175mm\u003c\/li\u003e\n\u003cli\u003eCompatible screw head: 3-9.5mm\u003c\/li\u003e\n\u003cli\u003eCutting capacity (soft iron wire): 2mm \u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708061585698,"sku":"ENGI-NJIPLR-PZ56","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/Engineer-Neji-Saurus-XP-Screw-Removal-Pliers-PZ-54-1-2025-04-10T04_04_01.143Z.jpg?v=1766121837"},{"product_id":"engineer-combination-scissors-gt-ph-55","title":"Engineer Combination Scissors GT PH-55","description":"\u003cp\u003eThe Engineer PH-55 are a 4-in-1 multipurpose scissors used by professionals and hobbyists to cut a wide range of materials.\u003c\/p\u003e\n\u003cp\u003eThese Japanese scissors are literally \"versatile\" when it comes to cutting. 4-in-1 multi-purpose blade combination:\u003cbr\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe front edge cut various objects with comfort, even slide-cutting the paper and cloth is easy.\u003c\/li\u003e\n\u003cli\u003eThe inner edge is micro-serrated. It tightly holds the object and nips it without slipping.\u003c\/li\u003e\n\u003cli\u003eWire cutter, adjacent to the pivot, is suitable for cutting wires. By cutting off wires with this part extends the blade sharpness.\u003c\/li\u003e\n\u003cli\u003eThe back blade is also cuttable. Useful to open cardboard box without damaging the contents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGrips are designed in maximum consideration of safety. Anti-slip handles enables to grasp the outside ring with stronger grip; bumper has overlapping guard preventing finger pinch; and ring part facilitates more efficient strength transmission.\u003c\/p\u003e\n\u003cp\u003eBlade cap has holes which help water drainage. This prevents the blade from rusting.\u003c\/p\u003e\n\u003cp\u003eAwarded design (International Design Excellence Awards in 2012, Good Design Award in 2015).\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Stainless steel (blade) \/ PBT (blade cap \u0026amp; handles)\u003c\/li\u003e\n\u003cli\u003eCutting capacity (with micro-serrated blade): cabtire code φ9mm \/ cotton insulated φ8mm \/ rope φ10mm \/ branch φ5mm \/ CD or card 1.2 mm thick \/ leather belt 4mm thick \/ aluminium sheet 5mm thick\u003c\/li\u003e\n\u003cli\u003eCutting capacity (with wire cutter): steel wire φ1.2mm \/ copper wire φ1.6mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 160mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 56mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 3mm\u003c\/li\u003e\n\u003cli\u003eGrip width: 83mm\u003c\/li\u003e\n\u003cli\u003eWeight: 120g\u003c\/li\u003e\n\u003cli\u003eNotes: The cutting capacity above is for reference only. Do not apply copper or steel wire to the micro-serration as it may damage the blades. Heat-treated or specially-hardened wire is not applicable for cutting. The scissors blade is rust-proof, but avoid excessive exposure to humidity.\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Engineer","offers":[{"title":"Default Title","offer_id":50708061847842,"sku":"ENGI-ALPSCI-PH55","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/files\/P-1-ENGI-ALPSCI-PH55-Engineer_Combination_Scissors_GT_PH-55-2023-09-26T15_19_08.jpg?v=1766121839"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/1143\/2738\/collections\/engineer_screw_removal_pliers_daitool.webp?v=1768967120","url":"https:\/\/japanesetaste.biz\/collections\/engineer.oembed?page=2","provider":"Japanese Taste Business","version":"1.0","type":"link"}